Computer Control Type Constant Pressure Calibration Set for Safety ValveFunctions and Characteristics:• Pneumatic or hydraulic clamping device is adopted. Clamping force is adjustable. The equipped pressure gauge displays the corresponding clamping force and provides a comparison table betwee

Main Preparation of Water and Gas Pipeline1. This test bench is equipped with high and low pressure medium water pumps. The low pressure pump is a vortex self-priming pump with large flow of water pressure. The full load pressure of the low pressure pump is 0-1.6Mpa. The power source of the high pre

Product configuration1. High pressure water pump: Shenzhen Jiali Pneumatic Hydraulic Co., Ltd. (gas driven liquid booster pump);2. Low pressure water pump: Zhejiang Aolong Technology Development Co., Ltd;3. Electrical appliances: Delixi, Chint;4. Pressure gauge: shockproof pressure gauge of China Ri

echnical Parameter of Equipment 1. Test butterfly valve type: straight flange type or wafer type butterfly valve;2. Clamping method: Clamping jaws clamp the opposite side of the flange. The clamping force is adjustable and the influence of external force is minimal.3. Sealing mode of butterfly valve

Pneumatic clamping and air-driven hydraulic clamping device are used, the clamping force is adjustable, 01 and a pressure gauge is displayed to show the corresponding clamping force. A comparison table of pressure and
clamping force is provided to facilitate the operator to verify the pressure and c

MHV-B300-S hydraulic valve test bench is based on our company's many years of production valve testing equipment technology, and is managed and produced in strict accordance with the ISO9001 quality management system. The products meet relevant standards such as GB/T13927-2008 "General Valve Pressur

The pressure gauge test bench is mainly used to test the accuracy of pressure gauge. It is mainly composed of pneumatic booster and pressure regulating system. Our pressure gauge test bench is divided into gas and liquid type according to the test medium. The test pressure of gas test bench can reac

The portable relief valve test bench is mainly used to test various relief valves. It is characterized by small size and easy to carry. The equipment can be taken to the use field. The maximum test pressure can reach 32Mpa. The maximum detection diameter of flange type safety valve is DN 150 mm, and

MGS-GAB02air booster unit (air charging system)when the driving gas source pressure of pneumatic tools is not enough, pressurize the pipeline gas source of 3-4 kgf / cm2 to 6-8 kgf / cm2, so as to improve the working efficiency of pneumatic tools and meet the requirements of underground coal mine op

(一) System technical description (model and specification: mgs-og100h-4h)Main functions: The quick plug test-bed is a special test-bed for hydraulic quick connector and high-pressure ball valve to test its pressure resistance performance under working pressure, and to conduct overpressure