Want to know about safety valve calibration bench?

1 .Introduction

The safety valve test bench is a new type of pressure test device developed by our company for reference to GB/T 12242-2005 (pressure release device and performance test specification), which is used to adjust and test the setting pressure of the safety valve.

2, Function and features

Safety valve test bench is used for various safety valve setting pressure adjustment, the whole set pressure detection, discharge pressure detection, back seat pressure testing, assessment of its pressure safety performance etc.. ,

A. pressure range: 0-480 bar for option(gas pressure and water pressure)

B. test medium: air, nitrogen, water;

C. test valve diameter: DN15-DN400 for option

D. pressure control accuracy: less than 1%F.S;

E. pressure measurement accuracy: 0.4 pressure gauge (optional higher pressure level);

F. Clamping way: hydraulic cylinder clamping;

G. station interface type: screw and flange type

H. clamping force output range: 0-50 tons;

I. supply voltage: 50Hz -60Hz ,220V/380V for option

J:Size：1500×1200×900mm(machine) +1500×800×800mm(clamping device)