Water Hydraulic Test Bench for Plastic Pipe Fire Pipe Extinguisher pneumatic hydraulic pressure test bench machine

The ODMT pressure burst test bench is applied to the test standard testing of related pressure components.The pressure resistance and burst tests of various hoses. meta pipes,joints.pressure vessels.etc.are also in line with other general and special international and domestic related pressure components Test standard.

ODMT can desian and manufacture static pressure and burst test benches for various products.with a maximum pressure of up to 6000 bar. Users can choose manual or automatic control mode according to their needs.The stable hydraulic control capability and safe structural design ofthe ODMT static pressure burst test bench ensure the perfection and safety of the testing process.

Description of equipment actions and the functions implemented 1. Pressure burst test on cold PVC hose and composite hose;
2. Using a pneumatic booster system, the boost rate can be set
   within the range as needed;
3. Using the pneumatic supercharger independently developed by our
   company as the supercharging device, the boosting speed is fast and the pressure is stable;
4. Adopt PLC control, set and display the number of tests,
   pressure, time, etc. through the touch screen, automatically stop the test and complete the task alarm buzzer when the
   requirements are met;
5. The test bed is equipped with an emergency button, and the test
   can be stopped immediately if there is an event.
6. Typical test procedure:

Constant speed boost-bursting
Constant speed boost-Holding pressure-bursting
Constant speed boost-Holding pressure-Pressure relief
Constant speed boost-Holding pressure-constant speed boost-Holding pressure-Until bursting
7. The operation interface is similar to the following figure: